Technicial Specifications
Maximum Rating | 520 BHP 388 bkW |
Displacement | 762.8 in³ 12.5 l |
Minimum Rating | 385 BHP 287 bkW |
Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
Flywheel and Flywheel Housing | SAE 1 SAE 1 |
Flywheel Teeth | 113 113 |
Stroke | 6.18 in 157 mm |
Bore | 5.12 in 130 mm |
Emissions | EPA Tier 4 Final and EU Stage IV EPA Tier 4 Final and EU Stage IV |
Length | 47.3 in 1201 mm |
Width | 39.9 in 1013 mm |
Height | 44.7 in 1186 mm |
Weight | 1976 lb 896 kg |
Advantages and Features
Emissions
Designed to meet U.S. EPA Tier 4 Final and EU Stage IV emission standards.Reliable, Quiet, and Durable Power
World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life.High Performance
Simple and efficient turbocharger with balance valve provides optimal air management and improved fuel efficiency.Fuel Efficiency
Fuel consumption optimized to match operating cycles of a wide range of equipment and applications.Fuel & Oil
Tier 4 Final, Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Cat® engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil.Broad Application Range
Industry-leading range of factory configurable ratings and options for agricultural, materials-handling, construction, mining, forestry, waste, and other industrial applications.Package Size
Exceptional power density enables standardization across numerous applications. Multiple installation options available to minimize total package size.Low-Cost Maintenance
Worldwide service delivers ease of maintenance and simplifies the servicing routine. Minimum 5000-hour diesel particulate filter (DPF) ash service interval enables low-cost maintenance. Capable of optimal oil change intervals of up to 500 hours, depending on rating, application, operating conditions, and maintenance practices. Engine is designed for a B10 life of up to 10,000 hours. The S•O•SSMprogram is available from your Cat dealer to determine oil change intervals and provide optimal performance.Quality
Every Cat engine is manufactured to stringent standards in order to assure customer satisfaction.World-class Product Support Offered Through
• Scheduled maintenance, including S•O•SSM sample• Customer Support Agreements (CSA)• Caterpillar Extended Service Coverage (ESC)• Superior dealer service network • Extended dealer service network through the Cat Industrial Service Distributor (ISD) programStandard Equipment
-
Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
-
Cooling System
- Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat.com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
-
Exhaust System
- Mid-mount turbocharged system with front and rear exhaust configurations
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
-
Fuel System
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
Lube System
- Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
-
General
- Paint: Cat yellow