Technicial Specifications
Maximum Rating | 1380 BHP 1029 bkW |
Emissions | NSPS Site Compliant Capable NSPS Site Compliant Capable |
Minimum Rating | 660 BHP 492 bkW |
Bore | 6.7 in 137 mm |
Stroke | 6 in 152 mm |
Advantages and Features
Engine Design
- Engine design built on G3500 proven reliability and durability - Ability to burn a wide spectrum of gaseous fuels - Robust diesel strength design prolongs life and lowers owning and operating costs - Broad operating speed range at lower site air densities (high altitude/hot ambient temperatures) - Higher power density improves fleet management - Quality engine diagnostics - Detonation-sensitive timing control for individual cylindersEmissions
When configured with customer-supplied air fuel ratio control and three-way catalyst, the engine is capable of meeting NSPS and non-attainment area emissions levels.Advanced Digital Engine Management
ADEM A4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging timeTesting
Every engine is full-load tested to ensure proper engine performance.Gas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repair-before-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change intervalOver 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine production. Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engineWeb Site
For all your Oil & Gas power requirements, visit www.cat.com/oilandgasStandard Equipment
-
Air Inlet System
- Intermediate duty air cleaner with service indicator
- Rain shield
-
Cooling System
- Two-stage charge air cooling: First stage — JW + 1st stage AC; Second stage — OC + 2nd stage AC
- Engine cooling and charge air cooling thermostats
- Jacket water pump, gear driven, centrifugal, non-self-priming
- Atercooler water pump, gear driven, centrifugal, non-self-priming
- Aftercooler with corrosion-resistent stainless steel core
-
Exhaust System
- Watercooled exhaust manifolds
- Dry turbocharger housing
- Dry exhaust elbow
-
Flywheels & Housings
- Flywheel, SAE No. 21
- Flywheel housing, SAE No. 00
- SAE standard rotation
-
Fuel System
- 32 - 35 psig gas supply to engine
- Electronic fuel metering valve
- Gas pressure regulator
- Gas shutoff valve
-
Instrumentation
- Product Link cellular radio
-
Lubrication System
- Crankcase breathers - top mounted Oil cooler
- Simplex oil filter - RH
- Shallow oil pan
- Oil sampling valve
- Turbo oil accumulator
-
Mounting System
- Rails
-
Power Take-Offs
- Double damper and guard
- Front housing, two sided
- Front lower LH accessory drive
-
General
- Paint — Cat yellow
- Crankshaft vibration damper and guard
Optional Equipment
-
Air Inlet System
- Remote air inlet adapter
-
Charging Alternator
- CSA alternator 24V, 60A
-
Cooling System
- Jacket water heater
- Mechanical joint assembly connections
-
Exhaust System
- Flexible fittings
- Elbows
- Flanges
-
Fuel System
- Fuel filter
- Gas shutoff valve
-
Instrumentation
- LAN adapter
- Operator interface panel
- Operator interface panel enclosure
- 3',15',40',90',140' Product Link extension harness
- 50', 100' interconnect harness
-
Lubrication System
- Lubricating oil
- Oil pan drain
- Air prelube pump
-
Power Take-Offs
- Single damper and guard
- Front stub shaft
-
Starting System
- 90 psi starter
- 150 psi starter
-
General
- Special paint
- Barring Device LH or RH
- Explosion relief valves
- Crankshaft pulley