Technicial Specifications
| Maximum Rating | 800 ekW (1000 kVA) 800 ekW (1000 kVA) |
| Minimum Rating | 910 ekW (1300 kVA) 910 ekW (1300 kVA) |
| Emissions/Fuel Strategy | U.S. EPA Tier 2 U.S. EPA Tier 2 |
| Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
| Manifold Type | Dry Dry |
| Bore | 5.7 in 145 mm |
| Stroke | 6.4 in 162 mm |
| Displacement | 1959 in³ 32.1 l |
| Engine Control and Protection | ADEM A4 ADEM A4 |
| Generator Set Control | EMCP 3.1 EMCP 3.1 |
| Generator | SR4B SR4B |
| Fuel System | MEUI MEUI |
| Frequency - Speed | 50/60 Hz (1500/1800 rpm) 50/60 Hz (1500/1800 rpm) |
| Fuel | Diesel Diesel |
| Length | 206 in 5228 mm |
| Width | 75 in 1905 mm |
| Height | 86 in 2180 mm |
| Weight | 20500 lb 9299 kg |
Advantages and Features
Product Support Offered Through the Global Cat Dealer Network
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure optiOver 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.Standard Equipment
-
Air Inlet System
- Dual element air cleaner
- Service indicator
-
Cooling System
- Radiator package mounted (50° C)
- Coolant drain line with valve at edge of base
- Coolant level sensor
- Fan and belt guards
- Coolant level sight gauge
- Cat Extended Life Coolant
- Metal top and bottom tanks
-
Exhaust System
- Dry exhaust manifold
- Flange outlets
-
Fuel System
- Primary fuel filter with integral water separator
- Secondary fuel filters
- Fuel priming pump
- Flex fuel lines
- Fuel cooler
-
Generator
- SR4B brushless
- Self excited
- Class H insulation
- Form wound
- IP23 protection
- Cat DVR 3-phase sensing with selectable volts/Hz
- 3 sensing CTs and one droop CT
- Anti-condensation space heater
-
Generator Attachments
- Bus bar - NEMA and IEC mechanicallug holes
- Bottom cable entry; capable of top cable entry
-
Controls
- ADEM A4 ECU
- EMCP 3 Control Panel
-
Lube System
- High efficiency oil filter
- Oil drain valves
- Fumes disposal
- Gear-type lube oil pump
- Deep sump oil pan
-
Mounting System
- Steel base frame (skidable)
- Anti-vibration mounts (shipped loose)
- Designed welded base for increased durability (I-beam design)
-
Starting/Charging System
- 24-volt starting motor
- 45-amp charging alternator
- Battery rack
- Battery disconnect switch
- Oversized batteries
-
General
- Paint — Caterpillar yellow except rails and radiators (gloss black)
- Flywheel and flywheel housing — SAE No. 0
Optional Equipment
-
Air Inlet System
- Air inlet adapters
- Precleaners
-
Exhaust System
- Stainless steel exhaust flex fittings
- Elbows, flanges, expanders, and Y adapter
-
Generator
- Permanent magnet excitation
- Oversize and premium generators
-
Starting/Charging System
- Jacket water heater with shutoff valves
- Battery chargers (10 amp)
-
Controls
- EMCP 4.2 control panel
- EMCP 4.3 control panel
- Local or remote annunciator panel
- Generator temperature monitoring and protection
- Discreet I/O module
- Load share module (optional with direct rack)
