Technicial Specifications
Power Rating
Generator Set Specifications
Engine Specifications
Generator Set Dimensions
| Power Range | 200 - 300 ekW |
| Frequency | 50 / 60 |
| Emissions/Fuel Strategy | IMO II, IMO III, U.S. EPA Tier 3, China Stage II |
| Speed | 200 ekW - 300 ekW |
| Aspiration | Turbocharged - Aftercooled |
| Bore | 115 mm |
| Stroke | 149 mm |
| Rated Engine Speed | 1500 / 1800 rpm |
| Cooling | Heat exchanger and separate or combined keel cooled options |
| Displacement | 9.3 l |
| Oil Change Interval | 500 hrs |
| Configuration | Inline 6, 4-Stroke Cycle diesel |
| Refill Capacity | Lube Oil System w/oil filter change: 24.5 L (6.5 gal) |
| Governor | Electronic |
| Rotation from Flywheel End | Counterclockwise |
| Width | 38.5 in / 978 mm |
| Length | 57.2 in / 1,452 mm |
| Engine Dry Weight | 2083 - 2474 lb / 945 - 1122 kg |
| Height | 43.0 in |
Advantages and Features
Key Features & Benefits
- Electronic control system provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds
- Common rail fuel system enables optimum combustion and low emissions
- RH and LH locations service options for fuel and oil filters, as well as dipstick location for easily accessible service
- Compatible with Cat® displays
- Available remote-mounted display panel with start, stop, and engine diagnostics
- 12V or 24V electrical system
- Certified by all marine classification societies
- Utilizes SCR technology enabling IMO III emissions compliance while lowering operational costs
Standard Equipment
-
Standard Equipment
- Water-cooled turbocharger and exhaust manifold
- Electronic control system
- Thermostats and housing
- Gear-driven Sea water pump (self-priming)
- Common rail fuel system
- Shell and tube jacket water heat exchanger
- Corrosion-resistant Sea water aftercooler
- Engine oil cooler
- Vibration damper and guard
- Primary fuel filters
Optional Equipment
-
Optional Attachments
- Alternators - 24V 70 or 105 amp, 12V 110 amp
- Closed crankcase ventilation
- Transmission gear oil cooler (engine mounted for HEX)
- Additional engine and transmission sensor packages
- Instrument panels
- Electric starting motors - 12V or 24V
- Air starting motor
- Dual electric starting motors or combined electric/air
- Electric fuel priming pump
- Fuel cooler
- PTO Drives - V-belt pulley stack, stub shaft
- Duplex fuel and oil filters
- Double wall fuel rail
