Technicial Specifications
| Cycle Time - Open | 2.1 s 2.1 s |
| Cycle Time - Close | 1.6 s 1.6 s |
| Crushing Force - Primary Cutter | 808 Sh Ton 7193 kN |
| Crushing Force - Cutter Tip | 411 Sh Ton 3655 kN |
| Crushing Force - Tooth Tip | 222 Sh Ton 1977 kN |
| Excavator Minimum | 65 tons 65 tons |
| Excavator Maximum | 90 tons 90 tons |
| Jaw Circuit - Max. Oil Pressure | 5076 psi 350 bar |
| Jaw Circuit - Max. Oil Flow | 119 gal/min 450 l/min |
| Rotation Circuit - Max. Oil Pressure | 2321 psi 160 bar |
| Rotation Circuit - Max. Oil Flow | 13 gal/min 50 l/min |
| Jaw Depth | 42.9 in 1089 mm |
| Cutter Length | 8.9 in 225 mm |
| Jaw Opening - Maximum | 62.4 in 1584 mm |
| Jaw Width - Fixed | 25.9 in 659 mm |
| Jaw Width - Moveable | 16.8 in 427 mm |
| Length | 113 in 2869 mm |
| Height | 98.1 in 2491 mm |
| Width | 43.3 in 1100 mm |
| Weight - Housing, Jaw and Bracket | 13547 lb 6145 kg |
| Weight - Jaw Only | 6753 lb 3063 kg |
Advantages and Features
Cycle Times are 50 Percent Faster
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
Up to 19 Percent More Force
- Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
Change Jaws in 15 Minutes
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP332 accepts these jaw types:
- Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition – opens wide to crack the largest concrete structures
- Pulverizer – crushes concrete, separating the rebar
- Shear – cuts structural steel, pipe, and cable
Durable and Maintainable
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.
