C4.4

C4.4

Cat?� C4.4 Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Maximum Power 200 hp 150 kW
Maximum Torque 609 lb-ft @ 1400 rpm 825 Nm @ 1400 rpm
Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V U.S. EPA & CARB Tier 4 Final, EU Stage V

Technicial Specifications

Power Rating
Maximum Power 200 hp 150 kW
Maximum Torque 609 lb-ft @ 1400 rpm 825 Nm @ 1400 rpm
Rated Speed 2200 rpm 2200 rpm
Minimum Power 109 hp 82 kW
Emission Standards
Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V U.S. EPA & CARB Tier 4 Final, EU Stage V
General
Engine Configuration Inline 4, 4-Stroke-Cycle Diesel Inline 4, 4-Stroke-Cycle Diesel
Bore 4.1 in 105 mm
Stroke 5 in 127 mm
Displacement 268.5 in³ 4.4 l
Compression Ratio 16.5:1 16.5:1
Aspiration Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA) Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion System Direct Injection Direct Injection
Rotation from Flywheel End Counterclockwise Counterclockwise
Aftertreatment DOC+DPF+SCR DOC+DPF+SCR
Engine Dimensions - Approximate
Length 32.4 in 822 mm
Width 29.6 in 748 mm
Height 35.3 in 897 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1180 lb 535 kg
Aftertreatment Dimensions
Length 26.5 in 675 mm
Width 24.5 in 623 mm
Height 17.8 in 453 mm
Weight 143.3 lb 65 kg

Advantages and Features

Installation

A modular and compact core on the Cat C4.4 makes installing the engine on any number of machine applications a relative breeze. And when downsizing from five-liter platforms, OEMs can see a 20% reduction in length, 5% reduction in height and 40% reduction in weight of the engine, significantly reducing installation costs.

Advanced Features

With a 15% increase in power density and 10% increase in torque when compared to its predcessor engine, the compact design of the Cat C4.4 reduces heat loss for more efficient engine output, so operators can conquer even the toughest tasks with relative ease.

Ideal Applications

Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors.

Total Cost of Ownership

There's a lot that can affect the lifetime cost of ownership on your engine. It can be as simple as fluid intake and as complex as weight distribution. Either way, the Cat C4.4 has it covered. When compared to similar 6-cylinder plaforms, the C4.4 saves more than 18% in fluid consumption and is specially balanced to be its most effective, every day.

Cat Dealer Product Support

The Cat C4.4 makes maintenance and service routines simple thanks to the worldwide Cat dealer network support. And for even more peace of mind, your Cat engine comes under warranty. See your Cat dealer for details.

Safety

Built-in clean emissions modules keep the Cat C4.4 performing at its peak while also keeping the air around the work site cleaner.

Standard Equipment

  • Air Inlet System
    • Standard air cleaners
  • Control System
    • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
    • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
  • Flywheels and Flywheel Housing
    • Fitted with SAE3 configuration as standard
  • Fuel System
    • Electronic high pressure common rail
    • Innovative filter design to ensure maximum protection of the engine
  • Lube System
    • Wide choice of sumps for different applications
  • Power Take Off
    • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
  • General
    • Available with or without a balancer
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Selective Catalytic Reduction (SCR)
    • 3" flex pipe connection with straight, 45°, and 90° options for flexibility