Technicial Specifications
Maximum Rating | 1050 BHP 783 bkW |
Emissions | U.S. EPA Non-road Tier 4 Final U.S. EPA Non-road Tier 4 Final |
Displacement | 1648 in³ 27 l |
Minimum Rating | 800 BHP 597 bkW |
Bore | 5.4 in 137.7 mm |
Stroke | 6 in 152.4 mm |
Rated Speed | 1800 r/min 1800 r/min |
Aspiration | Turbocharged-Aftercooled Turbocharged-Aftercooled |
Governor and Protection | ADEM A4 ADEM A4 |
Engine Weight - Net Dry | 6151 lb 2790 kg |
Oil Change Interval | 250 250 |
Rotation from Flywheel End | Counterclockwise Counterclockwise |
Flywheel and Flywheel Housing | SAE No. 0 SAE No. 0 |
Flywheel Teeth | 136 136 |
Minimum Cooling System - Engine Only | 15.9 gal (US) 60 l |
Length | 85 in 2160 mm |
Width | 50 in 1270 mm |
Height | 65 in 1650 mm |
Advantages and Features
Emissions
- Designed to meet U.S. EPA Tier 4 Final emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features diesel oxidation catalyst- Meets Tier 4 Final emissions requirements four years early, achieving environmental benefits earlier than required.Engine Design
- Proven reliability and durability of engine and aftertreatment- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needsLow Total Cost of Ownership
- Optimized fuel consumption- Maintenance-free aftertreatmentAdvanced Digital Engine Management
ADEM A4 control system providing integrated ignition, speed governing, protection, and controls, including detonation-sensitive variable ignition timing. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.Custom Packaging
For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat® engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.Transmissions
- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- Please contact Application Support Center for details.Testing
Every engine is full-load tested to ensure proper engine performanceProduct Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets- Caterpillar factory-trained dealer technicians service every aspect of your petroleum engine- Caterpillar parts and labor warranty- Preventive maintenance agreements available for repairbefore-failure options- S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change intervalOver 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engineWeb Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.Standard Equipment
-
Air Inlet System
- Twin rear-mounted turbochargers, ATAAC
-
Control System
- Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
-
Cooling System
- Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
-
Exhaust System
- Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
-
Fuel System
- Mechanical Electronic Unit Injection (MEUI™) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
-
Lube System
- Remote-mounted oil filters and RH-side blockmounted filters are available; crankcase fumes disposal system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour